  E-mail:sales@tmcut.com
Facebook   Linkedin   Twitter   Instagram   Youtube
You are here: Home » News » Industry News » What is the operating procedure of the automatic fabric spreader?

What is the operating procedure of the automatic fabric spreader?

Views: 412     Author: Site Editor     Publish Time: 2021-12-29      Origin: Site

An automatic fabric spreader is construction equipment mainly used for paving various materials on the surface. Various systems cooperate to complete the paving work. Therefore, the automatic fabric spreader has operating specifications during the operation, so what is the operating procedure for the automatic fabric spreader? Let's take a look together next.

This is the content list:

l Before starting the engine of the automatic fabric spreader

l After starting the engine of the automatic fabric spreader

l Running and ending of automatic fabric spreader


Before starting the engine of the automatic fabric spreader

The operator of the automatic fabric spreader must undergo professional training, understand the mechanical performance and structure of the automatic fabric spreader, master maintenance knowledge, and master the performance and operation essentials of the automatic fabric spreader as well as safety items, and be confirmed by the relevant department. Can operate the automatic fabric spreader alone. Before starting the automatic fabric spreader engine, you must check whether the amount of oil (oil, fuel, working oil, lubricating oil) is sufficient, the belt tightness on the fan of the automatic fabric spreader and whether the automatic fabric spreader has oil leakage and its parts Loosening phenomenon. Check whether all kinds of accessories, accessories, tools, etc. required for the work of the day are complete.


After starting the engine of the automatic fabric spreader

After starting the engine of the automatic fabric spreader, run it at idle speed for at least two minutes and check whether the monitoring system indicators are normal. The material of the material conveying vehicle of the automatic fabric spreader must be directed by someone to accurately discharge the material into the hopper of the machine. Before the automatic fabric spreader works, you must get in touch with the left and right leveling personnel to ensure that other personnel is not in the work before they can work. When the automatic fabric paver is shifting from the operating gear to the driving gear, it must be carried out at the low throttle, after the automatic fabric paver is completely stopped, and the working parts stop working. Personnel operating the automatic fabric spreader are strictly prohibited from operating after drinking and must wear neatly when operating the equipment, no slippers, smoking, eating, and other activities that hinder safe operation are not allowed.


Running and ending of automatic fabric spreader

After the automatic fabric spreader is working, all protective devices must be installed in the designated position.

The room of the automatic fabric spreader must be kept clean, and the oil and other dirt must be cleaned up in time, and tools and other items must not be placed randomly. Before leaving the operating table of the automatic fabric spreader, all operating mechanisms must be set to the "0" position. When the hydraulic automatic widening automatic fabric spreader is widening, you must pay attention to and observe the surrounding conditions to avoid hurting people and damaging the equipment. When the automatic fabric spreader is heated by a liquefied gas tank, the tank valve must be closed in the case of flameout or fire. After the automatic fabric spreader is finished, the screed must be placed on the skid when the cleaning material is transported, the tamping device, and when it is shut down. The automatic fabric spreader shall not hinder the traffic when it is parked, and warning signs shall be placed. The engine of the automatic fabric spreader runs idle for 5 minutes and then turns off, then cuts off the power supply and locks the instrument panel. The maintenance of the automatic fabric spreader must be carried out by the requirements in the manual.


Wuhan TIMING Weiye Technology Co., Ltd. is the newest industrial company, established in 2012, always guided by new technology, able to provide cutting systems for garment, technical fabric, and composite material production enterprises. The automatic fabric spreader has undergone a lot of tests before leaving the factory, and detailed instructions are attached to each automatic fabric spreader to consumers so that consumers can use it with more confidence. If you feel comfortable with the automatic fabric spreader, if you are interested, you can contact us, our website is https://www.timingcutter.com/.


Tel.:  +86-27-65525691
Address:  Room C-306, Ding Ye Building, Block 3,
Intl.Enterprises Center III,No.1,Optic Valley Avenue, East Lake
Hi-Tech District, Wuhan, Hubei, China. 
Post code:430074 
Facebook    Linkedin    Twitter    Instagram    Youtube
Quick Navigation
Leave a Message
NewsLetter
Get latest updates and offers.
Copyright © 2021 Wuhan TIMING Weiye Technology Co., Ltd. All Rights Reserved . Technology by Leadong   Sitemap ICP备案号:鄂ICP备16020420号-3